Address:First floor, building C, Shengfeng Industrial Park, No. 67, Benggang Road, Songgang street, Bao'an District, Shenzhen
Tel:0755-2722 9520
phones:136 3268 7511(Shenzhen) 133 1959 1911(Changsha)
0755-2722 9520
technical requirement
1. The frame is made of 80x40 national standard alloy aluminum profile, and the sealing plate is treated with cold plate spray;
2. The lifting track adopts SBR linear bearing track with stable operation and low noise;
3. The lifting is driven by closed-loop stepping motor, the speed is 0.5-5 M / min, which can be set digitally, and it is simple and clear;
4. Four sets of adjusting foot cup are equipped, and the foot cup and the ground are fixed with expansion screws, which is safe and reliable;
5. The rocker arm bracket is made of t6061 aluminum alloy with electrophoresis surface;
6. Use linear slide rail as up and down floating track;
7. The rocker arm is driven by a closed-loop stepping motor, with 315 ° forward and reverse rotation, and the speed of 2-12rrpm can be set;
8. Suction nozzle adopts negative pressure conveyor, gas consumption is 1900l / min at 0.6MPa, vacuum degree is - 9kpa;
9. SUS304 seamless steel pipe is used as horizontal flexible joint pipe, with wiring joint;
10. The pneumatic components are controlled by AIRTEC brand and Mitsubishi PLC;
11. Use Taiwan veinview touch screen control;
12. Low voltage electrical components adopt Chint brand
13. Menu control software, easy to learn and use;
14. Power supply: single phase AC220V50HZ 2000VA.
technical requirement
1. The frame is made of 80x40 national standard alloy aluminum profile, and the sealing plate is treated with cold plate spray;
2. The lifting track adopts SBR linear bearing track with stable operation and low noise;
3. The lifting is driven by closed-loop stepping motor, the speed is 0.5-5 M / min, which can be set digitally, and it is simple and clear;
4. Four sets of adjusting foot cup are equipped, and the foot cup and the ground are fixed with expansion screws, which is safe and reliable;
5. The rocker arm bracket is made of t6061 aluminum alloy with electrophoresis surface;
6. Use linear slide rail as up and down floating track;
7. The rocker arm is driven by a closed-loop stepping motor, with 315 ° forward and reverse rotation, and the speed of 2-12rrpm can be set;
8. Suction nozzle adopts negative pressure conveyor, gas consumption is 1900l / min at 0.6MPa, vacuum degree is - 9kpa;
9. SUS304 seamless steel pipe is used as horizontal flexible joint pipe, with wiring joint;
10. The pneumatic components are controlled by AIRTEC brand and Mitsubishi PLC;
11. Use Taiwan veinview touch screen control;
12. Low voltage electrical components adopt Chint brand
13. Menu control software, easy to learn and use;
14. Power supply: single phase AC220V50HZ 2000VA.